News list
Recommended news
Building a dust-free workshop for medica2024-02-01
Design of Food Cleanroom2024-02-01
Requirements for the decoration of dust-free workshops |
Publisher:Suzhou Lingxi Purification Engineering Co., Ltd. ©¦ Click count£º385 ©¦ Publication time£º2024-02-01 15:06:34 ©¦ close |
| Nowadays, the demand for dust-free workshops is increasing, and the requirements for dust-free workshops are also getting higher. During the decoration process of the dust-free workshop, it is necessary to ensure construction quality and cleanliness. Below, Decoration will share with you the requirements for the decoration of the dust-free workshop in Yantai. In the process of decorating a dust-free workshop, it is necessary to ensure the construction environment. Generally, it is necessary to clean while working, and the cleaning should be thorough without leaving any dead corners. Especially for concealed works, cleaning work should be done well, such as cleaning ceilings and walls, and keeping records to avoid areas that have not been cleaned. Clean air needs to be continuously transported to the workshop, and high-efficiency filters need to be installed in the workshop, Dust related operations are prohibited in the installed workshop, which may cause filter blockage. The decorated workshop needs to protect the surface of the panels and prevent them from being hit, stepped on, knocked, or subjected to excessive water during decoration. This operation will cause panel dents, hidden cracks, and panel contamination. The dust-free workshop needs to pay attention to sealing. When sealing with sealant, impurities and dirty oil in the base groove should be removed and kept dry. The floor of the dust-free workshop generally uses plastic sheets and roll surface layers. When storing, they should be classified according to specifications, size, and thickness. When laying the floor, the sheets and rolls should be coated with adhesive and compressed with air to avoid the presence of air. The on-site decoration of the Yantai dust-free workshop requires attention to the lighting system and ventilation. If the dust-free workshop is to be renovated, it is necessary to identify and cut off the power supply and toxic and harmful gases before construction can proceed. During the decoration of the dust-free workshop, temporary entrances and exits can be used for decoration materials, and when not in use, they can be closed to prevent dust from entering the workshop. In the decoration of the dust-free workshop, it is necessary to ensure firmness, and all components need to be connected to the main structure. Different materials are connected in different ways. Sealed with elastic materials. Pipes and lines should have appropriate slots of width and depth. Pipeline and circuit pressure testing to ensure no leakage before sealing treatment. The floor of the dust-free workshop decoration needs to be equipped with a waterproof and moisture-proof layer. The gaps in the dust-free workshop can be sealed with positive pressure, and the skirting board can be flush with the wall or retracted by 2-3mm during construction |
